Welcome back, Guest!
Register
Forgot your Password?
Page 86 of 87 FirstFirst ... 367684858687 LastLast
Results 851 to 860 of 862
  1. #851

    Default Re: Centos+Asterisk+ViciDIal Guide with Clustering

    Quote Originally Posted by justasking View Post
    Try ko i-research yan.

    May experience ka ba ts regarding ip pbx setup?
    S freepbx po

  2. #852

    Default Re: Centos+Asterisk+ViciDIal Guide with Clustering

    Quote Originally Posted by kojiromusashi View Post
    S freepbx po
    Vici, FreepBX and Issabel po pero with fxs and fxo setup sa Freepbx

    ----
    Guys Im looking for IT assistant
    requirements :
    Basic knowledge about asterisk
    Basic knowledge in vicidial
    Basic knowledge in pfsense
    and Network and hardware troubleshooting.
    17K all in

  3. #853

    Default Re: Centos+Asterisk+ViciDIal Guide with Clustering

    Homebase ba to sir Kojiro? pwede part time lang?

  4. #854

    Default Re: Centos+Asterisk+ViciDIal Guide with Clustering

    Office base po Ortigas
    5pm - 2am po
    Hindi nakakapagod ang trabaho.

  5. #855

    Default Re: Centos+Asterisk+ViciDIal Guide with Clustering

    Quote Originally Posted by kojiromusashi View Post
    Office base po Ortigas
    5pm - 2am po
    Hindi nakakapagod ang trabaho.
    baka pwede part time na home base diyan , or project base.
    Last edited by princeterror; 10th Dec 2019 at 21:33.

  6. #856

    Default Re: Centos+Asterisk+ViciDIal Guide

    Quote Originally Posted by justasking View Post
    Tanong lang guys.

    Nag set kasi ako ng voicemail sa server namin, tinry ko tawagan ung number namin and gumana siya. Ang problem ko lang is halos 6 rings before nag activate ung voicemail. Paano ko ba gagawing kaht 2 or 3 rings lang tapos magiging active agad ung voicemail? Thanks.
    If inbound: babaan nyo po ang "Drop time Seconds" default is 120 seconds
    if Outbound set nyo ang "Dial timeout" default is 60 seconds, set nyo sa 30 seconds.

    Hope it helps

  7. #857

    Default Re: Centos+Asterisk+ViciDIal Guide

    boss, meron ako Vicidial na latest. Pano ko ba macoconfigure ung Inbound, Outbound, at Trunk na gagamitin ko? Meron ka bang Step By Step procedure? thanks in Advance. Gusto ko kasing to Vicidial dahil maganda reportings nya.

  8. #858

    Default Re: Centos+Asterisk+ViciDIal Guide

    Na configure ko na server ko boss pero di ako maka pag outbound call. Eto settings ko ngayon kaso di ako makapag outbound call:

    Registration String:
    register => 112233445566:[email protected]:6789/112233445566

    Account Entry:
    [cts]
    username=123456778899
    type=friend
    secret=123345677899
    qualify=yes
    port=6789
    nat=force_rport
    host=111.222.333.444
    dtmfmode=rfc2833
    disallow=all
    context=trunkinbound
    canreinvite=yes
    allow=gsm
    allow=ulaw
    allow=alaw
    allow=g729
    allow=ilbc

    Globals String: SIPTRUNK = SIP/cts

    exten => _71NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
    exten => _7XXXXXXXXXXXXXX,2,Dial(${SIPTRUNK}/${EXTEN:1}@cts,,To)
    exten => _7NXXNXXXXXX,3,Hangup

    VERSION: 2.14-732a
    BUILD: 200108-0937


    The carrier successfully registered. However, when I tried to perform an outbound calls, the Asterisk logs always shows below and the calls didn't go thru:
    chan_sip.c:26515 handle_request_invite: Call from '132' (123.123.123.123:65476) to extension '7861064648855' rejected because extension not found in context 'default'.

    I need to use number 7 as my Prefix. Hope you can help me. Thank you in advance!

    I followed this guide (https://www.etollfree.net/predictive-di ... -dids.html) to configure my ViciDial.

    Salamat!
    Last edited by alfie013; 11th Jan 2020 at 14:07.

  9. #859

    Default Re: Centos+Asterisk+ViciDIal Guide

    Not sure kung ano po ang settings ng carrier nyo ptry po muna


    [cts]
    username=123456778899
    secret=123345677899
    type=friend
    qualify=yes
    (port=6789 -- ?? open po ba s firewall or naka define s firewall?)
    nat=force_rport
    host=111.222.333.444
    dtmfmode=rfc2833
    canreinvite=yes
    disallow=all
    allow=gsm
    allow=ulaw
    allow=alaw
    allow=g729
    allow=ilbc
    context=trunkinbound

    exten => _71X.,1,AGI(agi://127.0.0.1:4577/call_log)
    exten => _71X.,2,Dial(${SIPTRUNK}/${EXTEN:1},,To)
    exten => _71X,.3,Hangup

    And is this settings are the one given by the carrier? If you run into more trouble consult with the Carrier and or post more details po.
    Thanks sana makatulong. Sa ibang kapanalig baka may nkikita kayo n hindi ko nkikita share po kayo.
    Last edited by kojiromusashi; 16th Jan 2020 at 01:14.

  10. #860

    Default Re: Centos+Asterisk+ViciDIal Guide

    salamat paps. gumana ung dial pattern sa outbound kaso walang Inbound call. Anything na pwede ko icheck? naka disable na SIP ALG sa firewall (Fortigate) tpos policy are all good since wala namn naka block na ports.

Page 86 of 87 FirstFirst ... 367684858687 LastLast

Similar Threads

  1. Q> Cent 5.9 + Asterisk 1.8 + Vicidial
    By bolangan in forum Ubuntu & Other Computers
    Replies: 37
    Last Post: 22nd Jun 2019, 16:31

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •