Static IP Address, Networking

[rehjotaku]

Ang WAN static setup ay dapat sa router mismo, sino ba nagbibigay network mo? Si modem mismo from Converge? Or si Router? Kasi kung Si modem nagbibigay dun ka nagseset ng WAN STATIC IP. Madalas sa connection type mo siya ilalagay instead of DHCP magiging STATIC IP siya. Kung si router naman ang fully function router at pati features ke router make sure mo muna bridge mode to converge modem. Then dun mo ilalagay sa connection type instead of DHCP, static IP address. Mas maganda kung alam namin modem brand of converge mo at router mo para mas me idea kami.

[Bazte]

Sir Ganito sana set up nya. di ko kasi alam paano i coconfigure ung static ip sa router kapag nilogin ko ung admin ng router baka sakali mahelp mo ko. thank you...Attachment 1284855

madali lang to. ang trick dyan ay nasa cables. paki try mo to

isp modem -> router = use Straight Through ethernet cable. ito ung mga kasama sa mga isp modems.
Straight-Through-Cable.png

router -> switch or router (admin) configuration = Use crossover ethernet cable. usually ikaw gagawa nyan.
crossover-cable-.png


Choose a Straight Through or Crossover Cable?
Usually, straight through cables are primarily used for connecting unlike devices. And crossover cables are use for connecting unlike devices alike devices.

Use straight through cable for the following cabling:

Switch to router
Switch to PC or server
Hub to PC or server

Use crossover cables for the following cabling:

Switch to switch
Switch to hub
Hub to hub
Router to router
Router Ethernet port to PC NIC
PC to PC

[taktekayo]

madali lang to. ang trick dyan ay nasa cables. paki try mo to

isp modem -> router = use Straight Through ethernet cable. ito ung mga kasama sa mga isp modems.
Straight-Through-Cable.png

router -> switch or router (admin) configuration = Use crossover ethernet cable. usually ikaw gagawa nyan.
crossover-cable-.png


Choose a Straight Through or Crossover Cable?
Usually, straight through cables are primarily used for connecting unlike devices. And crossover cables are use for connecting unlike devices alike devices.

Use straight through cable for the following cabling:

Switch to router
Switch to PC or server
Hub to PC or server

Use crossover cables for the following cabling:

Switch to switch
Switch to hub
Hub to hub
Router to router
Router Ethernet port to PC NIC
PC to PC

>>>>

Sir Maraming salamat po sa sagot nyo saktong sakto okay na sya.